Boîtier d'oscilloscope DSO138Tools, Parts & Spare Parts

3D Model Description

Ich habe mein DSO138 Oszilloskop selber zusammen gelötet, deshalb dachte ich mir, ich kaufe kein fertiges Gehäuse, sondern erstelle mir mein eigenes. Ich habe mein Gehäuse zweifarbig gedruckt. Gehäuse transparent und Druckknöpfe und Schieber in schwarz. Ich empfehle nach dem Druck, alle Teile kurz mit Aceton zu glätten.

Designed By

Created by 3D Designer Joruf

Joruf
Threedoo

Download
3D Printer
Files

/
0
Visits
34
Likes
0
Follow
3
Order 3D Printout
Comments
0

3D Printable File(s)

The 3D design contains the following 3D printable files and printer settings.

File Name Size Upload Date 3D Printing Settings
36.18 KB 2018-02-28
Configuration Type
RECOMMENDED
Required Number
3
Print Speed
85mm/s
Travel Speed
120mm/s
Support Structure
everywhere
Buildplate Adhesion
brim
Print Duration
15 min
Required Filament Weight
1g
Required Filament Length
1.19 MB 2018-02-28
Configuration Type
RECOMMENDED
Required Number
1
Layer Height
0.1mm
Infill Density
100%
Print Speed
85mm/s
Travel Speed
120mm/s
Print Duration
5 hours, 50 min
Required Filament Weight
34g
Required Filament Length
Recommended Color
transparent
201.09 KB 2018-02-28
Configuration Type
RECOMMENDED
Required Number
1
Layer Height
0.1mm
Infill Density
100%
Print Speed
85mm/s
Travel Speed
120mm/s
Print Duration
2 hours, 50 min
Required Filament Weight
19g
Required Filament Length
Recommended Color
transparent
129.58 KB 2018-02-28
Configuration Type
RECOMMENDED
Required Number
5
Layer Height
0.1mm
Infill Density
100%
Support Structure
none
Buildplate Adhesion
brim
Print Duration
5 min
Required Filament Weight
1g
Required Filament Length

3D Raw File(s)

The designer provides the following raw files as download for this model.

File Name Size Upload Date
DSO138-Gehaeuse.123dx 157.36 KB 2018-02-27

Additional Parts Required

Additional parts are required to use this 3D model.

Part Name Amount Price Comparison
DSO138 Oszilloskop 1